900 SERIES

The Flat Front Insert Model 900

The IS 900 Flat Front Insert Gas Log Heater

900 SERIES MODEL IS900

The IS 900 Flat Front Insert is Archer’s most powerful heater, with a 45Mj Gas rate and a combustion efficiency of 90% with a 5.4 Star Energy Rating. The heater has the capacity to heat an area up to 250 square metres (25 squares)*.

It incorporates features such as:

  • 3 Heat settings
  • 3 Automatic fan speed settings
  • Powered flued technology
  • Automatic ignition
  • Automatic humidifier
  • Easy installation, installs anywhere using a 40mm PVC fluing (Co axial or single flue) 
  • Zero clearance installation.
  • Optional Ducting 
  • Optional remote control
  • Optional log sets.

*NOTE: Heating capacity may vary subject to climate, home design, heater location, ceiling height and installation etc.

MAKE AN ENQUIRY
900 SERIES SPECIFICATION
  • Model Series IS900: Insert Flat Front Model IS900
  • Input: Nat/LPG High 44M/h, Nat/Lpg Medium 25M/h, Nat/Lpg Low 20M/h
  • Output: 11.2Kw High, 8.2Kw Medium, 5.0Kw Low 
  • Combustion Efficiency: 90%
  • Fan: Automatic 3 speed
  • Ignition: Automatic H.S.I.
  • Automatic Humidifier: Standard
  • Heat Settings: 3 Settings – High/Medium/Low
  • Heating Areas: Up to 250 square metres (25 squares) subject to climate, home design, heater location, ceiling height and insulation, etc.
  • Clearances: Zero clearance to all surfaces Note: insert model require minimum clearance of 50mm side and top for easy removal of appliance.
  • Energy Star Rating: 5.4

Tested To AS4553-2008 - Approval No.7978

HEATER OPTIONS
  • Color:  Charcoal(standard)        
  • Optional Colors:  Metallic Brown, Pewter           
  • Optional Powdercoat Colours: River Gum, Manor Red, Silver Pearl
  • Door Trim: Charcoal standard, Chrome, Stainless steel, Gold
  • Optional Surround: Picture Frame (Not Available In Stainless steel), Bolted Surround Stainless Steel, Bolted Surround charcoal
  • Ducted Central Heating: 5 to 7 ducts
  • Remote Control: Optional 

TECHNICAL SPECIFICATIONS

FS700 FREESTANDING FLAT FRONT

  • 1. Flue Outlet Co-axial (outside 65mm, inside 40mm)single flue 40mm Ø. Flexible Flue 40mm Ø.
  • 2. Air Inlet
  • 3. Electric Cord
  • 4. 1/2″ BSP Connection (inside)
  • 6. 90/40mm PVC Elbow
  • 7. Flexible PVC Pipe
  • 8. Heater Surround
  • 9. Flue locating Ring 6″ (150mm)
IS900-Update-Specs-Update